Vehicles
Sections
401 not categorized PORSCHE 944 IMS CHECKCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: 911 1994-98 (includes uncategorized and accessory items) 90134722303R The original rubber bushing is proven to be a weak link that can fail prematurely, allowing chassis geometry to be compromised. Symptoms include suspension movement during acceleration, braking and cornering. The powerflex black series bushing is manufactured of a more dense rubber than the original. It is a 95 shore compound that is more resistant to load than standard rubber which provides better control of chassis geometry for track use. Features: designed for track use improved track handling more precise and accurate alignment constant steering geometry increased tire life better steering feedback longer service life of suspension components less nvh (noise vibration hardness) than polyurethane bushings pl...(choose a part on the right to read more)
$37.40
Make a selection 90150114623EQ Steel, prime coated rocker panel support, made by dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$51.70
Make a selection 90151107321 This is the rear release cable for the rear engine deck lid. It is 1900 mm in length. When replacing this cable, we also recommend replacing the handle, part # 90155281320 and the grommet, part # 91151253100. Also, check your rear lid lower lock, part # 90151205200, perfect time to replace it if it is corroded and the spring is worn. Sold individually. 1 necessary per car.
From $9.50
Make a selection 90161561620EQ This is the round rubber cap that seals the door contact switch. They degrade and become brittle with age and are important as they keep moisture out of the switch. We recommend replacing both at the same time. Sold individually. Left of right side fitment.
$3.30
Make a selection 91110541120OE When working on your cylinder head, we recommend replacing the valves, valve seat rings, guides, springs, retainers and temperature sensor at the same time to reduce future labor costs. High-quality trw OEM (original equipment manufacturer) replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 6 necessary per car.
$44.00
Make a selection 91120702703 This oil cooler / radiator coil supply hose tends to wear, crack, deform and can even collapse with age, vibration and poor oil quality. This hose is the latest supersession, part # 911 207 027 05. It is a high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Please note: the corresponding return line is part # 91120702904. We recommend replacing that at the same time to save on labor.
$112.20
Make a selection 91135104122EQ If you are experiencing a pulsation and hearing grinding sounds when braking, odds are your rotors need to be replaced to restore full stopping power. This rotor is an OEM replacement (replacement for original #911 351 041 22), manufactured by zimmermann in Germany. It is internally vented and z-coated for corrosion resistance. Features: anti corrosion "z-coating" prevents rust. Simple bolt on, modifications are not necessary. Made in Germany. Sold individually. 2 necessary per car. Left or right-side fitment. Please note: rotors should always be changed in pairs. Please check the model fitment tab to ensure accurate fitment.
$124.30
Make a selection 91135295005EQ If your brake pads are at the end of their service life you will experience vibration, squealing, a pulsating brake pedal or poor response under heavy braking. We recommend replacing them as soon as any of the above signs are noticed. Also, be sure to inspect the rotors when changing the pads. For convenience, we sell complete rotor and pad kits, simply check under brake service kits. This pad set contains textar OEM (original equipment manufacturer) parts that we source in Germany to ensure quality, reliability and precise fitment. Textar brake pads are precision engineered to offer maximum safety, performance and comfort. This uncompromising approach has been the very ethos of textar for more than 100 years. ...(choose a part on the right to read more)
$72.60
Make a selection 91150103900 This is the pillar that buts up to the a-pillar to secure the hinges. It is prime coated and includes the angular bracket. This hinge pillar is made by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: these newly reproduced pillars are made of spcc steel and include an m8 stamp. Due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjus...(choose a part on the right to read more)
$669.90
Make a selection 91150104000 This is the pillar that buts up to the a-pillar to secure the hinges. It is prime coated and includes the angular bracket. High-quality replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Please note: these newly reproduced pillars are made of spcc steel and include an m8 stamp. Due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$669.90
Make a selection 91150105301GRV This steel fender joining plate is a prime coated and made by dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
From $106.70
Make a selection 91150195501 Steel, prime coated short forward section floor pan repair panel with suspension mounts made by dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$409.20
Make a selection 91150301505KEV Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar headlight bucket. Features: - produced by an OEM manufacturer. - lightweight .6 lbs. (.3 kg) - made of high strength kevlar. - metal mounting ring is cast inside the bucket for mounting. Sold individually. 1 necessary per car. Please note: requires drilling for wiring, etc. This is a high-quality part that takes time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world.
$774.40
Make a selection 91150301605KEV Made in europe by one of the manufacturers to Porsche. Extremely high-quality kevlar headlight bucket. Features: - produced by an OEM manufacturer. - lightweight .6 lbs. (.3 kg) - made of high strength kevlar. - metal mounting ring is cast inside the bucket for mounting. Sold individually. 1 necessary per car. Please note: requires drilling for wiring, etc. This is a high-quality part that takes time to manufacture and cure properly. Lead times can vary anywhere from 15-30 days depending on where you are in the world.
$774.40
Make a selection 91150340205EQ Steel, prime coated outer rocker panel, made by dansk. They offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment for perfect fitment.
$132.00
Make a selection 91150403100GRV3 This is a sheet metal repair cup that is located behind the fuel door. It includes the fuel door hinge mount, lock (part # 901 504 034 20grv), buffer (part # 911 025 679 00) and tube for the pull cable. It is manufactured by dansk, they offer a complete line of replacement bodywork to complement the entire Porsche model range. All dansk products are manufactured to European standards to ensure the quality that you expect for your Porsche. This commitment has made dansk one of the original equipment suppliers to the Porsche in Germany. Sold individually. 1 necessary per car. Please note: due to variances in production at the factory, age, accident damage or rust, each part may require trimming and or adjustment ...(choose a part on the right to read more)
$284.90
Make a selection 91151192302EQ1 This gasket sits on the inside of the hood in the front trunk. It tends to get nicked and cut and will degrade with time. It is essential to keep moisture out of the trunk and should be replaced at the first signs of damage. This is a high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car.
$136.40
Make a selection 91154522500EQ High-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Sold individually. 1 necessary per car. Please note: this contains the trim frame slot for chrome / black trim.
$158.40
Make a selection 91155161900 Whether replacing or restoring, attention must be paid to the door sill as it suffers from wear and tear. This cover adheres to the door sill with double sided adhesive, so it is a simple piece to replace yourself. Sold individually. View/Change Diagram
From $31.90
Make a selection 9115555050101EQ We go to extra lengths to ensure that our linings are as similar to the originals as possible. Each is cut and trimmed to fit perfectly. Replaces original part # 911 555 505 01 05t made in Germany. Sold individually. 1 necessary per car.
$94.60
Make a selection 911561023602EQ This is a complete cabrio top cover made in Germany with original material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes all of the original tenax snaps / retainers in the original locations. This would replace original part # 911 561 023 603 av made in Germany. Sold individually. 1 necessary per car. Please note: if you have a 1978-85 model please see our part # 911561023003eq
$1,237.50
Make a selection 911561050002FA1 We go to extra lengths to ensure that our linings are as similar to the originals as possible. Each is cut and trimmed to fit perfectly. Replaces original part # 911 561 050 002 fx made in Germany. Sold individually. 1 necessary per car. Please note: specific model fitment below.
$177.10
Make a selection 911561023606EQ This is a complete cabrio top cover made in Germany with original material. It is as close to the original as possible and is cut and trimmed to fit perfectly. Includes all of the original tenax snaps / retainers in the original locations. This would replace original part # 911 561 023 60 6ha made in Germany. Sold individually. 1 necessary per car.
$1,112.10
Make a selection 91156419100 This is the felt or velvet sealing strip that protects the outer edge of the sunroof panel. It assists in keeping out moisture and protects the panel during operation. It can become brittle and will crack overtime so it is essential that it is in good order. It can also lose the plush black appearance with wax applications. Sold individually. 1 needed per car. View/Change Diagram
From $44.00
Make a selection 91156419300 This is the felt or velvet sealing strip that protects the outer edge of the sunroof panel. It assists in keeping out moisture and protects the panel during operation. It can become brittle and will crack overtime so it is essential that it is in good order. It can also lose the plush black appearance with wax applications. Sold individually. 1 needed per car. View/Change Diagram
From $22.00
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |